Introduction:
The quarter windows on Fox Body Mustang convertibles have been known for experiencing various issues. Common problems include excessive movement forward and backward as well as inward and outward movement of the window. These issues are often caused by a broken lower guide rod mount or dry rotted and broken guide rod bushings. The factory plastic design of these components contributes to their deterioration over time. Fortunately, 5.0 Resto offers a comprehensive solution with their Quarter Window Resto Kit, designed specifically for 1983-1993 Convertible Mustangs. This article will provide a step-by-step guide on how to remove and replace the quarter windows using this kit.
The 5.0 Resto Quarter Window Resto Kit includes the following components:
– Exclusive billet aluminum guide rod mount
– Four window guide rod bushings
– Two quarter window motors
– All necessary hardware for a trouble-free installation
Preparation:
Replacing the quarter windows using this kit can be a time-consuming process, so it is important to allocate sufficient time to complete the task. It is recommended to set aside an entire workday for this job. Now, let’s go through the installation process for your 83-93 Fox Mustang.
Removal:
1. Start by removing the lower seat bottom cushion.
2. Proceed to remove the interior quarter panel trims.
3. Locate and remove both of the lower window regulator plate trim bolts at the rear of the plate.
4. Lower the top to gain better access.
5. Remove the seat belt, cross brace, and cross support.
6. Unplug the window motor connector and remove the plastic sheathing that covers the wires.
7. Remove the two bolts securing the window motors to the brackets.
8. Carefully remove the motors and set them aside.
9. Locate the lower guide rod mount and remove the nut securing it to the threaded rod.
10. Once the nut is removed, the guide rod mount can be taken out of the vehicle.
11. Remove the remaining parts of the guide rod assembly, including the bushings and washers.
Installation:
1. Begin the installation process by inserting the new guide rod bushings into the quarter window glass.
2. Slide the guide rod assembly through the bushings, making sure it is centered.
3. Attach the new billet aluminum guide rod mount to the threaded rod by securing it with the nut provided in the kit.
4. Position the guide rod mount in the lower mount opening.
5. Attach the new window motors to the brackets using the bolts provided.
6. Align the holes in the motors with the holes in the brackets and tighten the bolts to secure the motors in place.
7. Connect the window motor connectors to the wiring harness.
8. Slide the plastic sheathing back over the wires and ensure a secure fit.
9. Secure the cross support, cross brace, and seat belt back into place.
10. Install the lower window regulator plate trim bolts at the rear of the plate.
11. Attach the interior quarter panel trims.
12. Finally, re-install the lower seat bottom cushion.
Conclusion:
By following these steps and using the 5.0 Resto Quarter Window Resto Kit, you can successfully replace the quarter windows on your 83-93 Mustang convertible. This kit provides high-quality components and addresses common issues found in the Fox Body quarter window system. Remember to allocate sufficient time and follow the instructions carefully to ensure a proper installation. With the help of this kit, you can restore your Mustang’s quarter windows to their original functionality and enjoy a smoother and more secure driving experience.